Low Noise 1500ML Full Automatic water bottle blowing machine with 6 Cavity
Description:
PM series pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has various cavities and the maximum capacity of the products is 20L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers etc. which is made of plastic of crystalline type, such as PET and PP etc.
Flow chart:
PET preform→Autoloader→reheater →molding→ bottles
Features:
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the FESTO air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Two ways of operating: Automatic and manual.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Easy installation and starting
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
Advantages:
1. Low costhigh efficiencyeasy operation and maintenance, etc, profited from the fully automatic technological process.
2.Ideal cooling system make the finished bottles without any flaws.
3. Easy for you to installtest and start up.
4. Low rejection rate: Less than 0.2 percent.
5.Customized bottle mold design.
Technical Parameter
| Model |
Item |
PM-A2 |
PM-A4 |
PM-A6 |
PM-A8 |
| Productivity |
Depend on bottle design |
2400-3000PCS/H |
3500-4500PCS/H |
5500-6500PCS/H |
8000-9000PCS/H |
| Product type |
Volume |
0.1-2.0L |
0.1-2.0L |
0.1-2.0L |
0.1-2.0L |
| Body diameter |
≤100mm |
≤100mm |
≤100mm |
≤100mm |
| Height |
≤310mm |
≤310mm |
≤330mm |
≤330mm |
| Neck diameter |
≤38mm |
≤38mm |
≤38mm |
≤38mm |
| Mold |
Cavity |
2 |
4 |
6 |
|
| Mold thickness |
240mm |
240mm |
240mm |
240mm |
| Mold volume |
260*240*370mm |
510*240*360mm |
640*240*360mm |
640*240*360mm |
| Main machine power |
Electrical source power |
380V/220V 50/60HZ |
380V/220V 50/60HZ |
380V/220V 50/60HZ |
380V/220V 560/60HZ |
| |
3Phase |
3Phase |
3Phase |
3Phase |
| Rated power |
25kw |
49kw |
73kw |
97kw |
| Really use power |
6.5kw |
13kw |
25kw |
|
| Air system |
HP air compressor |
1.6m³/min3.0Mpa |
3.0m³/min3.0Mpa |
6.0m³/min3.0Mpa |
6.0m³/min3.0Mpa |
| LP air compressor |
1.0m³/min1.0Mpa |
1.6m³/min1.0Mpa |
2.0m³/min1.0Mpa |
23.0m³/min1.0Mpa |
| Air tank |
0.6m³3.0Mpa |
0.6m³3.0Mpa |
1.0m³3.0Mpa |
1.0m³3.0Mpa |
| Air dryer |
1.0m³/min3.0Mpa |
2.0m³/min3.0Mpa |
6.0m³/min3.0Mpa |
6.0m³/min3.0Mpa |
| Cooling water |
Water Chiller |
3HP |
3HP |
5HP |
8HP |
| Machine |
Size(L*W*H) |
1900*1280*1930mm |
1900*1860*1930mm |
4100*1400*1800mm |
4100*2200*1800mm |
| Weight |
2000kg |
3600kg |
4200kg |
5800kg |
| Preform unscrambler |
Size(L*W*H) |
2000*950*2480mm |
2000*950*2480mm |
2000*950*2480mm |
2000*950*2480mm |
| Weight |
500kg |
500kg |
500kg |
500kg |
Electric Brand Name
| Name |
Brand |
Original |
|
| Cylinder |
SMC |
Japan |
| Magnetic valve |
SMC |
Japan |
| Photoelectric switch |
XINLV |
CHINA |
| Touch screen |
MCGS |
CHINA |
| PLC |
Mitsubishi |
Japan |
| Transducer |
SMC |
Japan |
| servo motor |
HUICHUANG |
CHINA |
Factory show
Our Service
Installation service
When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our factory,and see the machine running.
Customized service
1.We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
After-sales service
1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2.When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4.We provide one year warranty
5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6 .24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
7 .12 Months guarantee and life-long technical support.
8.Your business relationship with us will be confidential to any third party.
9. Good after-sale service offered, please get back to us if you got any questions.
Quality Control
We have the single quality department,that make sure the material of the raw materials is good,and ensure the machine running smoothly.
If you want to know more information about the product,You can send an inquiry, we will solve any of your problems and send you running vedio.
FAQ
1.How to tell us your enquiry?
You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.
2.Are you manufacturer or trading company ?
We are industrial manufacturer, which locates in Zhangjiagang city over 20 years .
3.Where is your factory?
Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplame and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.
4. Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.
We Warmly Welcome Customers All Over The World To Our Company.If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.
Audited Supplier 
){kind=link}